Meter parameters of transmission lines P5-10 / 1

Specify the price Availability: under the order   Condition: new Booking Call back

Meter parameter transmission lines & nbsp; P5-10 / 1 & nbsp; for detection of inhomogeneity wave resistance (damage) in the cables and power lines and communication in coaxial radiofrequency paths, for determining the distance (time delay) to the fault (heterogeneity) nature of the damage, measurement of the inhomogeneity.

Device P5-10 / 1 can be used under field and laboratory conditions for measurements on damaged lines and cables to monitor status, fault forecasting them, measure their lengths and temporal symmetrization delay with high accuracy

The principle of operation of the device P5-10 / 1 is based on the method of pulse reflectometry -. modern methods of investigation of distributed systems, allows us to observe all the heterogeneity of both in-line and measure the position and characteristics of each of them individually.

The main advantages of the method are clear presentation of measurement results, a small time measurement, high sensitivity, the possibility of determining the parameters of the elements of a distributed system in ohms, Henry Farads.

Modern meters parameters inhomogeneities transmission lines picosecond range are characterized by high resolution in distance constituting units of centimeters (for the lines with air filling .)

& nbsp;

Main technical characteristics of the device P5-10 / 1:

range measuring the distance (full scale): from 300 to 300,000 m

Maximum resolution: 5 m.

Sensitivity overlapping damping:. 80dB

. The duration of the probing signals, ms (pulse shape): & nbsp;

0,05; 0.1; 0.3; one; 3; ten; 30 (approximately bell);

not less than 100 (Delta)

Input impedance: 30-470 ohm

Weight: 9.8 kg <... br>
Dimensions:. 274h160h430 mm

Replaces: P5-10, FLIGHT-105M, flight-105M1