Spectrum analyzer S4-60

Specify the price Availability: under the order   Condition: new Booking Call back

S4-60 spectrum analyzer for the study of the spectrum of periodic signals of arbitrary shape and modulation as well as the spectra of stationary noise.

spectrum analyzer S4-60 for observation and measurement of the relative levels of the spectral components of the continuous periodic signals and . recurring radio pulses of oscillographic indicator for storage CRT

Features spectrum analyzer S4-60:

S4-60 spectrum analyzer allows for:

• Measurement the spectrum parameters of continuous oscillation complex shape;
• Measurement of the modulated waves;
• Measurement parameters and by parasitic oscillations;
• The measurement of the emission band and out of band emissions;
• Investigation of the spectrum of radio pulses repeated; .
• panoramic observation

  The device consists of three units: the ultra-high frequency transducers YA4S-59, 60-YA4S and oscillographic display YA40-0830

  Main specifications. device S4-60:

  
  instrument frequency range from 0.01 GHz to 39,6
  breakdown subbands following: 0.01-1.5; 1,45-3,45; 3,45-7,45; 7,45-12,0; 12,0-19,45;
  19,45-39,6
  limits of acceptable basic error measurement input sinusoidal signal frequency MHz ± (10-2 f +10) in the range from 0.01 to 1 ,
  ± 5GHz (10-2 + ​​f 2) with integrated calibrator
  10-2 ± f in the range of 1.45 to 39,6GGts
  limits of acceptable frequency measurement error under the operating conditions MHz ± (1,5h10-2 f +10) in the range from 0.01 to 1.5 GHz
  ± (1,5h10-2 f +2) calibrator with built 1,5h10-2
  ± f in the range of 1.45 to 39,6GGts,
  where f-frequency sinusoidal input signal
  spans Nominal values ​​are set in the range from 50 kHz to 1000MHz frequency range from 0.01 to 1.5 GHz and from 50 kHz to 2000 MHz in the frequency range from 1.45 GHz to 39.6 discrete increments 1,2,5
  nominal values ​​of maximum frequency bands automatic adjustment 1500 MHz frequency range from 0.01 GHz to 1.5
  Nh2000 in the range of 1.45 to 39.6 GHz,
  where N - number of the first working harmonic oscillator
  Stripes Propus Kania level - 3dB should kHz 1,3,10,30,100,300
  instability frequency oscillators for 10 minutes after a setup time in normal conditions no more 500 kHz, when included phase-locked loop system;
  Nx 1h103 off when the PLL frequency deviation
  parasitic device heterodyne mode in REVIEW, no more than 350 Hz, when the PLL is enabled;
  not more 15h103 off when the PLL
  limits of acceptable basic error relative attenuation step attenuator NOMINAL LEVEL,% ± 4 in normal conditions
  ± 6 in operating conditions, at the position of the attenuator from 2.5 mV to 8 mV;
  limits of acceptable soft error relative attenuation of the attenuator nominal level,% ± 12
  limits of acceptable basic error indicator logarithmic amplitude scale ranging from 0 to - 70 dB, dB ± 2 - in normal conditions
  ± 3 - in the working conditions of Vp
  unevenness udno-frequency characteristics of the device for input of the mixer, not more than 10 dB
  average noise level in the pass band of 1 kHz at the input of the mixer, not more dBm - 100 in the range of 0.01 - 1.5 - 3.45 GHz < br> - no more than 95 in the range of 3,45-7,45 GHz
  not more so - in the range of 90 GHz 7,45-12,0
  not more so - in the range of 85 GHz 12,0-19,45
  not more so - in the range of 70 GHz 19,45-39,6
  by input selector, dBm - 85 in the range of 1,8-3,45 GHz
  - 80 in the range of 3,45-7 , 45 GHz
  - 75 GHz range 7,45-12,0
  relative interference level at the input of the mixer when exposed to the input of two sinusoidal signals of equal amplitude with a level of 0.1 mW and the value of mismatch between them of 2 MHz dB is not more than - 60 in the range of 0.01 to 1.5 GHz
  not more than - 50 in the range of 1.45 to 3.45 GHz
  relative interference level at the input of the preselector when subjected to two input signals of equal amplitude with a level of 0.1 mW and the value of mismatch between them 100 MHz, db not more than - 60 in the range of 1.8 to 12 GHz
  interference level on the image channel at the input selector in the range from 1.8 to 12 GHz, db not more than - 60
  wave device resistance in the frequency range 0.01 to 12 GHz, 50 Ohm < br> The device has three types of internal scan sweep
  with different kinds of start - single Sequence;
  - Automatic startup;
  - Automatic startup internal synchronization with the mains frequency;
  - launching of the envelope pulse signal to be analyzed scale of not less than 3 grid cells
  CRT device provides specifications after time samoprogreva, not less than 1 hour
  AC power line voltage (220 ± 22)
  rate (50 ± 0,5) Hz < br> The power consumed from the network, VA 400
  dimensions (each block), mm 488 x 173 x 580
  Weight (each of the blocks), 30 kg
  Components analyzer transducer YA4S-59 < br> converter YA4S 60
  indicator YA40-0830 with block YA4S-54 Replaces: S4-25, S4-27Vozmozhnaya substitution: S4-77, S4-85

  Terms and Conditions   Shipping and payment   Warranties & Returns   Contacts

  Documentation for download of the device not available