Oscilloscope S1-73

Specify the price Availability: under the order   Condition: new Booking Call back

Oscilloscope & nbsp; S1-73 for visual observation of the form of electrical signals and their measurement parameters

& nbsp;

Main technical characteristics of the device S1-73:.

number of beams (channels) CRT: single beam

range of measured voltages: 20 mV & ndash;. 350 W.

The range of measured time intervals: 0.4 ms & ndash; . 0.5

Bandwidth: 0 & ndash; 5 Mgts.Vremya rise HRP: 70 ns

Measurement error signal amplitude. No more than 15%

error measurement time intervals:. No more than 10%

emissions by HRP: not more than 5%. The width of the beam line: 0.8 mm

working area of ​​the screen horizontally:. 60 mm

working area of ​​the screen vertically:. 36 mm

voltage supply. : 220 V, 50 Hz; 115 V, 400 Hz

Power consumption: 30 * A.Diapazon operating temperature. -30 + 50 & deg; C

PARAMETERS CHANNEL Y:. & Nbsp;
< br /> channel Sensitivity: 10 mV / div & ndash; . 20 V / div

inlet channel resistance: 1 MOhm

input channel capacity: 35 pF

PARAMETERS CHANNEL X:.. & Nbsp;
< br /> minimum sweep time: 0.1 ms / div

maximum scan duration: 0.05 sec / div

external synchronization signal amplitude: 0,5 & ndash;.. 50V

genlock frequency range: 10 Hz & ndash; 5 MHz

external synchronization input resistance: 50 ohms, 30 pF. 750 kohms 5 pF (1:10)

CHANNEL CALIBRATION PARAMETERS:.. & Nbsp;

frequency calibration signal: square wave, 1 kHz

calibration voltage signal: . 1

Possible replacement: S1-112A, S1-118A, S1-94 .