Oscilloscope S1-128

Specify the price Availability: under the order   Condition: new Booking Call back

The oscilloscope provides monitoring signals on channels A, B and the sum of A + B in any combination, inverting the signal in channel B, channel switch alternately and intermittently.

Main technical characteristics of the device S1-128 :

number 2 channels bandwidth (0 & hellip; 25) MHz & nbsp;

Vertical deflection: & nbsp;

coefficient of deviation of 2 mV / div & hellip; 10 V / div & nbsp;

basic error & plusmn; 4% error divider 1:10 & plusmn; 5% & nbsp;

maximum allowable total value of the DC and AC voltages: & nbsp;

in closed and open inputs 100 V with 1:10 divider 250 & nbsp;

digital error measurement voltage & plusmn; 3% & nbsp;

increase the transient response time 14 ns & nbsp ;

input impedance: & nbsp;

with direct input 1 MOhm with 1:10 divider 10 MOhm & nbsp;

input capacitance: the direct input 25 pF & nbsp; < br>
with 1:10 divider 15 pF & nbsp;

mode: a synchronization channel scan from channel a? Channel B synchronizing with the scan of channel B, channel A and B into alternate or intermittent mode switching, the addition signals of channels A and B, change the polarity signal in channel B & nbsp;

horizontal deflection: sweep coefficient 100 ns / div & hellip; 0.5 s / div & nbsp;

basic error & plusmn; 4% error when using streamers & plusmn; 5% & nbsp;

Stretching sweep 10 times & nbsp;

Mode scan operation: self-oscillating, waiting a single & nbsp;

Synchronization: The frequency range of 10 Hz & hellip; 25 MHz & nbsp;

Sources: the signal of channel A (B) in single-channel mode, the signal in the channel A and B in the dual channel mode, and signal summing mode, a signal from an external source & nbsp;

The amplitude of the external clock (0,2 & hellip; 10) In & nbsp;

image size (internal clock signal investigational) (0,8 & hellip; 8) fissions & nbsp;

General characteristics: & nbsp;

Integrated calibrator produces pulses meander: amplitude 0.6 & nbsp;

error & plusmn; 1% & nbsp;

frequency 1 kHz & nbsp;

error & plusmn; 1% & nbsp;

digital error measuring time intervals & plusmn; 3% & nbsp;

CRT screen size 60 & times; 80 mm (8 & times; 10 bars) & nbsp;

beam line width of 0.8 mm & nbsp;

power: & nbsp;

- AC 220 V, 50 Hz; 220 V or 115 V, 400 Hz & nbsp;

power consumption VA 65 & nbsp;

- the DC 27 V & nbsp;

power consumption 40W < / p>