Calibrator devices for pulsed measurements I1-18

Specify the price Availability: under the order   Condition: new Booking Call back

Calibrator devices for pulsed measurements & nbsp; I1-18 designed for operation in the AIS or as an autonomous tester HRP-Y paths oscilloscopes 2nd grade accuracy in accordance with GOST 22737-77, in the frequency band of 0-100 MHz under stringent conditions . operation

Allows you to measure the following parameters PH:. rise time, settling time, the release on top of the unevenness and the slope of the top

Generator I1-18 used as part of the AIS to control the metrological characteristics of oscilloscopes as well as to measure the PH meters linear two-ports with a bandwidth of 0-100 MHz.

The generator I1-18 includes modes of manual and external control software parameters. . As a part of the device used microprogrammable processor

& nbsp;

The main technical characteristics of the device I1-18: < p>

modes:

mode I:

A single sequence of pulses of positive and negative polarity: & nbsp;

duty cycle of less than 100,

rise time of not more than 0.85 ns, & nbsp;

pulse duration: 0,1-999,9 microseconds, & nbsp;

maximum amplitude at load . 50 ohms: 20B

II mode:

A single sequence of pulses of positive and negative polarity: & nbsp;

porosity of at least 10, & nbsp;
< br /> rise time of not more than 100 ns,

pulse width: 1-9999 ms,

maximum amplitude at a 50 ohm load:. 5B

Fitting error period: & plusmn; 1% & nbsp;

setting error amplitude:. & plusmn; 3%

power consumption: 100 V * A

& nbsp; <.. / p>

Replaces: G5-39, I1-14

Recommended Replacement: 62-K2S

Weight. 19kg

Dimensions: 480h160h475 mm .