Calibrator devices for pulsed measurements I1-17

Specify the price Availability: under the order   Condition: new Booking Call back

Calibrator devices for pulsed measurements & nbsp; I1-17 designed for operation in the AIS or as an autonomous tester HRP-Y paths oscilloscopes 1-4-th classes according to GOST 22737-77 accuracy in the frequency band of 0-10 MHz.

The device I1-17 allows you to measure the following parameters PH:. rise time, settling time, the release on top of the unevenness and the slope of the top

It is used as part of AIS monitoring metrological performance oscilloscopes as well as measuring parameters of linear HRP quadripoles (video amplifiers, attenuators and t.) with the frequency band of 0-10 MHz.

I1-17 The generator includes modes of manual and external software control parameters via the CPC. As a part of the device used microprogrammable processor

& nbsp;

The main technical characteristics of the device I1-17:. < p>

modes:

mode 1:

A single sequence of pulses of positive and negative polarity: & nbsp;

porosity of not less than 100 , & nbsp;

front width: 8.5 ns, & nbsp;

cutoff duration less than 100 ns, & nbsp;

pulse duration: 0.1 999.9 microseconds, & nbsp;

maximum amplitude: 35 V, & nbsp;

ejection pulse on top of not more than 1.5%, & nbsp;

nonuniformity pulse peak of not more than 0,75%

mode 2:

a single sequence of pulses of positive and negative polarity: & nbsp;

porosity of at least 10, & nbsp;.

rise time of 100 ns, & nbsp;

cutoff duration less than 200 ns, & nbsp;

0,1-9999 ms pulse duration, & nbsp; < br>
maximum amplitude: 5 V, & nbsp;

Throw with the pulse top of not more than 1%,

unevenness pulse peak of not more than 0,5%

installation error of the amplitude:. & plusmn; 3% & nbsp;

Fitting error period: & plusmn; 1%

consumption:.. 120 * A

& nbsp;

Replaces: I1-11
< br /> Recommended replacement: 62-K2S

Weight: 19 kg

Dimensions:. 480h160h475 mm .